Physical and Chemical Properties
First Aid Measures
Exposure Controls/Personal Protection
Fire Fighting Measures
Accidental Release Measures
Stability and Reactivity
|Product Identification||Back to Contents|
|Physical and Chemical Properties||Back to Contents|
105 - 106
1.4147 (20 C)
|First Aid Measures||Back to Contents|
Seek medical assistance.
Move victim to fresh air. Apply artificial respiration if victim is
not breathing. Administer oxygen if breathing is difficult.
Remove and isolate contaminated clothing and shoes. Wash skin with
soap and water. Flush with running water for at least 20 minutes
Flush with running water for at least 20 minutes.
|Hazards Identification||Back to Contents|
Vapors may cause dizziness or suffocation. May cause irritation or
May cause irritation or burns.
Vapors may form explosive mixtures with air. Vapors may travel to
source of ignition and flash back. Most vapors are heavier than
air. They will spread along ground and collect in low or confined
areas (sewers, basements, tanks). Vapor explosion hazard indoors,
outdoors or in sewers.
|[EC Risk Phrase]|
R 10 36/37/38
|[EC Safety Phrase]|
S 16 23 26 36
|Exposure Controls/Personal Protection||Back to Contents|
Wear appropriate protective gloves, clothing and goggles.
Wear positive pressure self-contained breathing apparatus (SCBA).
|Fire Fighting Measures||Back to Contents|
Use of water spray when fighting fire may be inefficient. Small
Fires: Dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. Large Fires: Water spray, fog or
alcohol-resistant foam. Use water spray or fog; do not use straight
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.
|Accidental Release Measures||Back to Contents|
Make no contact with the spilled material. ELIMINATE all ignition
sources and ground all equipment. Stop leak if you can do it
without risk. A vapor suppressing foam may be used to reduce
vapors. Absorb or cover with dry earth, sand or other
non-combustible material and transfer to containers. Use clean
non-sparking tools to collect absorbed material.
|Transport Information||Back to Contents|
|Stability and Reactivity||Back to Contents|
Fire may produce irritating, corrosive and/or toxic gases.